SNMP is an abbreviation of Simple Network Management. This feature allows using an SNMP management console to query camera properties, but does not allow changing them. Open the SNMP Configuration dialog to set the information that is to be revealed.
The MOBOTIX-specific values that are available via SNMP are specified in the MOBOTIX MIB. If the SNMP agent is active, you can obtain the MOBOTIX MIB from the SNMP Configuration dialog. Make sure that you are always using the MOBOTIX MIB of the corresponding MOBOTIX camera software.
Parameter |
Description |
---|---|
Agent |
The SNMP agent can offer authentication according to SNMPv2c or SNMPv3. Note that you can use both versions concurrently or switch off SNMP as a whole. |
System Location |
Contents of the SNMP System Location variable ( |
System Contact |
Contents of the SNMP System Contact variable ( |
System Description |
Contents of the SNMP System Description variable ( If this field is left empty, the camera automatically sets the variable to the model name of the camera (e.g. S15D). |
Parameter |
Description |
---|---|
Community |
Community description (password) for read access according to SNMPv2c. |
IP Filter |
You can limit the access to specific ranges of IP addresses. To do so, enter a valid IP address range in this field. Syntax: Example 1.
Leave this field empty to grant access to all IP addresses. |
Parameter |
Description |
---|---|
User Name |
User name. |
Password |
Login password for the user. |
Authentication Method |
Algorithm used to verify the user name and password. |
Key |
Key for encrypting the transferred data. If you do not enter a key in this field, the camera uses the access password. |
Encryption Method |
Algorithm used to encrypt the transferred data. |
Klicken Sie auf Setzen, um die Einstellungen zu aktivieren und bis zum nächsten Neustart der Kamera zu sichern.
Klicken Sie auf Voreinstellung, um diesen Dialog auf die werkseitigen Voreinstellungen zurückzusetzen (dieser Button wird nicht in allen Dialogen angezeigt).
Klicken Sie auf Wiederherstellen, um alle Änderungen seit dem letzten permanenten Speichern der Konfiguration zu verwerfen.
Beenden Sie den Dialog durch Klick auf Schließen. Hierbei wird geprüft, ob Änderungen der Gesamtkonfiguration vorliegen. Ist dies der Fall, werden Sie gefragt, ob die Gesamtkonfiguration dauerhaft gesichert werden soll.
de, en |